Smart tips for installing tiles at home

Building your dream house is a unique experience especially, if you are building it brick by brick. While each step requires patience and smart application, there are also enough tricks to reduce the work load without compromising on your aspirations. Once you have built your house, the interiors is the next big challenge. From installing the tiles to choosing the curtains, all requires planning and careful consideration. Since the exteriors are completed, the first focus while doing the interior of the house is the tilling.

The current trends allows you to play with the colours, designs and even cementing them through different techniques, giving you the option to add floor tiles singapore to each of your rooms differently. Here are few things to keep in mind while installing the tiles in your house:

Talk to the expert

While you are doing your own R&D about the tiles and the installation process, there is no harm in seeking out an expert such as facade Singapore. Talk to an interior designer or a tile expert and ask them to visit your house. Display your ideas and the tile options to the expert and give them a brief about how you would want each room to be. Once you get the experts feedback, it will reduce your work and give you different choices that will suit each of your room well.

Bigger is easier

Since your house is your dream, you can always go for the intricate designs and small tiles, keeping the designing in mind. However, the process of installing small tiles is cumbersome and since you are doing it on your own, there are chances of not achieving symmetry while installing the tiles. Therefore, it is best to use big tiles to cut short the process. Use big printed tiles or 3D tiles, which are water resistant in the bathroom. You can use them in the kitchen but the 1x1s are a better option.

Even out sub-floor

If the foundation of the floor that you are going to install the tiles is uneven, then you will end up doing a shoddy job, as the tiles will not sit properly on the floor. Use a sub-floor levelling compound to even out the space before you get to the installation. It is not difficult as the compound will seal the cracks, smoothen out any dents and level the floor. Again, be cautious while evening out the sub-floor as it should not end up with the floor becoming slanted or getting a slight tilt in some places.

Sticking it well

If you are walking on the tile floor and it breaks or pops out of position, it will leave you red-faced in front of your friends and family. So, to avoid such a sticky situation, install the tiles with a top thin-set mortar or cement. Do not compromise on the quality, as it will turn into a cumbersome process of putting it into place again. You do not want to go through the torture of seeing tiles popping out or becoming loose when you walk over it. Consult a tile expert and get the suggested thin-set to cement the tiles strongly to the floors. Interestingly, thin-set cement also works as a fixer for small defects on the sub-floor, as even here you are going to smoothen the cement before placing the tile.

Cutting edges

This step is quite a challenge and requires a lot of strategic planning, as you have to ensure that the tiles are cut in a way that they do not stand out oddly. Do not do a rushed job, as you will end up cutting the tiles haphazardly. Rent a wet saw and divide your room into patches so that you are able to place the tiles first and then slowly one by one stick them to the floor and carefully cut the edges so that it falls into a pattern.